Antaira LNX-1002G-SFP-T 10-Port Gigabit Unmanaged DIN Rail Switch with 2x SFP and -40 to 75 °C

Eight gigabit devices and a pair of fiber uplinks covers a large share of industrial cabinets, from machine lines to field enclosures. The LNX-1002G-SFP-T is the extended temperature build in the Antaira LNX-1002G-SFP series: an industrial gigabit unmanaged Ethernet switch with eight copper ports and two fiber slots.

It has eight 10/100/1000Base-T RJ45 ports with auto negotiation and auto MDI/MDI-X, and two dual-rate SFP slots that take 100 or 1000 Mbps transceivers, so the fiber mode, connector and reach follow the modules fitted. Two fiber slots allow a chained or dual-path layout between cabinets. Switching is unmanaged and store-and-forward on a 20 Gbps switching fabric, with an 8K MAC address table, 9.6 KB jumbo frames and IEEE 802.3x flow control, so the switch passes traffic with no set-up.

Power arrives on 12 to 48 V DC redundant inputs on a removable 6-contact terminal block, and the LNX-1002G-SFP-T draws 12 W. Antaira builds in high EFT and ESD protection against unregulated voltage, reverse polarity protection and overload current protection, and one relay output rated 24 V DC, 1 A signals a power failure to a PLC or alarm panel.

The LNX-1002G-SFP-T operates from -40 °C to 75 °C, which suits unheated and outdoor cabinets where winter lows and summer peaks go beyond a standard rating. The IP30 metal case mounts on a DIN rail or a wall, with the mounting hardware included. Shock, vibration and free-fall testing follow IEC 60068-2-27, IEC 60068-2-6 and IEC 60068-2-32. Antaira lists UL Class 1, Division 2 and UL 61010-1 certification, with FCC and CE marks and RoHS compliance, and the switch is covered by Antaira’s 5-year warranty. The LNX-1002G-SFP is the same switch rated -10 °C to 70 °C, the LNP-1002G-SFP-T adds PoE+, and the LNX-1002G-10G-SFP moves the uplinks to 10G SFP+.