D115SOXP Overview
Super Mode runs an Orin NX module at a higher power setting for more AI throughput, provided the carrier and cooling are designed for it. The AVerMedia D115SOXP is a fanless box PC built on that basis, and it is the Orin NX box in the D115S series. It is built on the D115S carrier board, and the D115SONP is the same box with an Orin Nano 8GB.
The D115SOXP is supplied with a Jetson Orin NX 16GB or 8GB module. NVIDIA rates these at up to 157 TOPS and 117 TOPS in Super Mode, against 100 TOPS and 70 TOPS at standard settings, which gives room for larger detection models or more camera streams without changing module. Two internal MIPI CSI-2 connectors with four lanes each, on 22-pin FPCs, take embedded cameras directly. AVerMedia publishes JetPack 6.2 board support packages on Ubuntu 22.04, and an onboard TPM 2.0 holds security keys in hardware.
Two GbE RJ45 ports handle cameras and uplink, with optional PoE on Ethernet 1 and out-of-band management over NC-SI on Ethernet 2. The 15-pin and 10-pin headers take an optional Allxon OOB module for remote power cycling and recovery, and a 40-pin connector takes an optional 4G or 5G daughter board. One HDMI output runs at 4K and 60 Hz, two USB 3.2 Gen 2 Type-A ports run at a native 10 Gbps each, a 256GB NVMe SSD is installed and an M.2 E-key 2230 socket takes optional Wi-Fi. The 20-pin header carries CAN, two UARTs, two I2C buses and four GPIO lines.
The D115SOXP runs fanless from -25 °C to 40 °C in Super Mode and -25 °C to 60 °C in normal mode, so the power mode can follow the site. It takes 12-24 V DC through a DC jack or 4-pin ATX header, and AVerMedia lists CE, FCC and KC marks. We supply it with the Orin NX module fitted, JetPack flashed in the power mode the site suits, and any optional 4G or 5G modem, OOB module, Wi-Fi and antennas fitted and tested before it ships.
D115SOXP Specifications
| Overview | |
|---|---|
| Brand & Model | AVerMedia D115SOXP |
| Features | Compact Embedded Fanless GPU Industrial |
| Performance | |
| AI Performance | 70–100 TOPS |
| Memory | 16GB Soldered On-board 8GB Soldered On-board |
| System-on-Module | NVIDIA Jetson Orin NX 16GB: 100 TOPS, 1024-core Ampere GPU with 32 Tensor Cores, 8-core Arm Cortex-A78AE 2.0GHz, 16GB 128-bit LPDDR5, 10-25W NVIDIA Jetson Orin NX 8GB: 70 TOPS, 1024-core Ampere GPU with 32 Tensor Cores, 6-core Arm Cortex-A78AE 2.0GHz, 8GB 128-bit LPDDR5, 10-20W |
| Secure Crypto Processor | TPM 2.0 (Trusted Platform Module) |
| Operating System | Linux Linux Ubuntu 22.04 |
| Jetpack Version | JetPack 6.2 |
| Graphics | |
| Multi Display Support | Single Display Support |
| Display Outputs | 1x HDMI |
| I/O | |
| Ethernet | 2x Ethernet Ports |
| 2x GbE LAN [RJ45] Optional PoE Modules | |
| USB | 2x USB Ports |
| 2x USB 3.2 Gen 2 [Type A] | |
| CANbus | 1x CANbus Ports |
| 1x CANbus [Terminal Block] | |
| GPIO | GPIO [4-lines] |
| MIPI Interface | 2x 4 Lane MIPI CSI-2 |
| Remote Management | Allxon In-Band Allxon Out-of-Band |
| Expansion | |
| M.2 | 2x M.2 Expansion Slots |
| 1x M.2 E-Key [2230] 1x M.2 M-Key [PCIe] [2280] | |
| Wireless Connectivity | Optional 4G Modem Optional 5G Modem Optional WiFi/Bluetooth |
| Storage | |
| Storage | 1x M.2 SSD |
| NVMe | NVMe SSD Support |
| Power | |
| Power Input | 12-24V DC Input [4-Pin] 12-24V DC [Barrel Connector] |
| Environmental Conditions | |
| Thermal Dissipation | Fanless Passively Cooled Chassis |
| Operating Temperature | -25°C to 40°C [-13°F to 104°F] |
| Storage Temperature | -40°C to 85°C [-40°F to 185°F] |
| Certification | CE FCC KC |
AVerMedia Edge AI Systems in the USA
Things Embedded supplies the AVerMedia D115SOXP in the USA, and we supply the D115SOXP with JetPack flashed, the module and storage fitted and the unit tested before it ships. Within the AVerMedia range, the D115SONP takes a Jetson Orin Nano 8GB Super module for up to 67 TOPS and keeps -25 °C to 60 °C in both power modes, and you can compare every model on our AVerMedia Jetson computers page.
For alternatives from our own range, see our rugged NVIDIA Jetson computers and edge AI computers.
Consult. Design. Integrate.
Things Embedded is a leading USA supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.
Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.