AVerMedia D115WOXB-1 NVIDIA Jetson Orin NX Fanless Industrial PC with 4G/5G Options, Dual GbE and Extended Temperature

When an edge AI unit sits on a pole, in a car park or on a remote site, a lock-up usually means a site visit. The AVerMedia D115WOXB-1 is a fanless industrial PC built for that situation, with connectors for an optional 4G/5G daughter board and an optional Allxon out-of-band module. It is the Orin NX box in the D115W-1 series, built on the D115W-1 carrier board, and the D115WONB-1 is the same box with an Orin Nano 8GB.

The D115WOXB-1 is supplied with a Jetson Orin NX 16GB or 8GB module, rated by NVIDIA at up to 100 TOPS and 70 TOPS respectively, enough for multi-camera detection and tracking. Two internal MIPI CSI-2 connectors with four lanes each, on 22-pin FPCs, take embedded cameras directly. AVerMedia publishes JetPack 6.2 board support packages on Ubuntu 22.04, and the Allxon service adds 24/7 remote management with out-of-band disaster recovery once the optional module is fitted.

Two GbE RJ45 ports handle cameras and uplink; Ethernet 1 can take an optional PoE board, and Ethernet 2 carries out-of-band traffic over NC-SI. The optional daughter board connects through 5-pin and 30-pin connectors for 4G or 5G backhaul. One HDMI output runs at 4K and 60 Hz, two USB 3.2 Gen 2 Type-A ports cover peripherals, a 256GB NVMe SSD is installed, and an M.2 E-key 2230 socket takes optional Wi-Fi. The 20-pin header carries CAN, two I2C buses, four GPIO lines and two UARTs, which are not available while the OOB module is fitted.

The D115WOXB-1 runs fanless from -25 °C to 60 °C, with storage from -40 °C to 85 °C, on 9-24 V DC through a DC jack or 4-pin ATX header. AVerMedia lists CE, FCC and KC marks. We supply it with the Orin NX module fitted, JetPack flashed and the SSD installed, and with any optional 4G or 5G modem, OOB module, PoE board and antennas fitted and tested before it ships.