AVerMedia D131S-001 NVIDIA Jetson Orin NX and Orin Nano Super Mode Carrier Board with 4x USB 3.2 Gen 2 and -40 to 85 °C

Carrier boards built into robots and outdoor equipment often sit in enclosures that get cold overnight and hot under load. The AVerMedia D131S-001 is the Industrial build of the D131S series carrier board, rated from -40 °C to 85 °C, with Super Mode support for Jetson Orin NX and Orin Nano. AVerMedia aims it at AMRs, smart security and smart inspection.

The D131S-001 accepts Jetson Orin NX 16GB or 8GB and Orin Nano 8GB or 4GB modules, in normal or Super Mode. Two 4-lane MIPI CSI-2 connectors on 22-pin FPC give each camera four lanes for higher-resolution sensors. An M.2 M-key 2280 slot on PCIe x4 takes an NVMe SSD, and AVerMedia supplies a JetPack 6.2 BSP on Ubuntu 22.04.

Four USB 3.2 Gen 2 Type-A ports split into two native 10 Gbps ports and two behind a hub. HDMI runs at 3840 x 2160, at 60 Hz with Orin NX and 30 Hz with Orin Nano, beside a GbE RJ45. A CAN 2.0 FD terminal block, the 40-pin header with six GPIO lines and TPM 2.0 cover control and security. Optional daughter boards add 5G, an 802.3af PoE PSE, out-of-band management or DisplayPort, and the M.2 E-key 2230 slot takes optional Wi-Fi.

Power comes in at 12 V to 24 V DC on a barrel jack or ATX 4-pin connector, and a heat sink with fan is optional. AVerMedia lists CE, FCC and VCCI, and the board is RoHS 2 compliant. For indoor builds, the D131S-002 is the Commercial version, and the D131SOXB puts the same carrier in a box. We supply the D131S-001 with the Jetson module fitted, NVMe storage installed and JetPack flashed, tested before it ships.