DFI ADS103-Q670DB Intel Bartlett Lake and 14th Gen Core Thin ITX Motherboard with Q670E Chipset, Dual LAN and 15 to 36 V DC Input

A machine HMI or panel PC on a 24 V supply is often maintained remotely by the machine builder long after it ships. The ADS103-Q670DB is the Q670E build in the DFI ADS103 series of Thin ITX motherboards, combining Intel vPro with six rear USB 3.2 Gen 2 ports and a 15 to 36 V DC input on a 170 x 170 mm board that fits behind a display.

The LGA1700 socket accepts Intel Core Series 2 (Bartlett Lake-S), 12th, 13th and 14th Gen Core, Intel Processor 300, Pentium and Celeron, at up to 65 W TDP. For an HMI a 35 W T-series Core i3 or i5 is often enough, and the same board takes up to 24 cores where the panel also runs vision or data collection. Two DDR4 3200 MHz SO-DIMMs take up to 64 GB, and Intel UHD Graphics drives two DP++ outputs at up to 4096 x 2304, an internal LVDS or eDP panel and an optional fourth display through DFI’s extension port.

Networking is one 2.5GbE port on an Intel I226V and one GbE port on an Intel I219LM, which carries the vPro management traffic. Six rear USB 3.2 Gen 2 ports serve touch controllers, barcode readers and cameras, and internal headers add two USB 3.2 Gen 1 and four USB 2.0. Two RS-232/422/485 ports and 8-bit DIO reach PLCs and field devices. Storage is NVMe at PCIe Gen4 x4 on the M.2 M-key plus two SATA ports, with RAID support, and the B-key and E-key take cellular and Wi-Fi modules. The PCIe x16 Gen5 slot supplies up to 75 W.

The ADS103-Q670DB runs from 15 to 36 V DC on a DC jack or 4-pin connector, operates from -5 to 65 °C and carries CE, FCC, UKCA and RoHS compliance with TPM 2.0 and a watchdog. Choose ADS103-R680DB to add ECC memory support to the same I/O, or ADS103-H610IB for three Ethernet ports on the H610E chipset.