Jupiter-MM-5000 high-efficiency, high-precision 218W power supplies consist of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, integrated thermal solution, detachable screw terminal block I/O connections, and PC/104 bus connectors. The wide input voltage range of 7 to 34VDC is compatible with industry standard 12V, 24V, and 28V inputs.
On-board intelligence provides an unsurpassed level of control, monitoring and safety. All features are accessible and configurable via benchtop application software plus a programming library for real-time control.
The Jupiter-MM-5000 from Diamond Systems uses a state-of-the-art design with the latest generation high efficiency components. It delivers efficiency as high as 95 percent, reducing input power requirements as well as heat generation.
Diamond Systems’ Jupiter-MM-5000 was engineered for rugged applications such as automotive or on-vehicle. Extended temperature operation of -40°C to +85°C is tested and guaranteed. Low-profile, surface mount components reduce susceptibility to shock and vibration. Both a low profile heat sink and heat spreader cooling options are available. I/O connections are made with locking screw terminal blocks for the highest degree of ruggedness.
Advanced System Controller
The full featured Jupiter-MM-5312 models include a system controller that offers advanced configuration, control, and monitoring features. The system controller is accessed via a USB port and is accompanied by benchtop configuration software as well as an application library for in-application real-time control.
|Brand & Model
|Diamond Systems JUPITER-MM-5000
|3.3V/5V/12V DC/DC PC/104-Plus Extended Temperature Rugged Power Supply
|7 – 34VDC
|Over / under voltage, reverse polarity, surges, transients, reflected noise
|Output voltage / current
|+5V at 20A maximum
|+12V at 8A maximum
|+3.3V at 5A maximum
|+5V standby at 1A maximum
|+3.3V standby at 0.1A maximum
|Current limit and short circuit protection
|±0.8%, Vmin to Vmax, 0-100% load on all outputs, -40°C to +85°C
|0.35% maximum output voltage droop at 5V output, 0-20A load, VIN = 12V, TA = 25°C
|44mV peak-to-peak maximum
|12mV peak-to-peak at 5V output, 0-20A load, VIN = 12V, TA = 25°C
|92-94% at 5V output, 0-20A load, VIN = 12V, TA = 25°C
|Transient load response
|+/-72mV at 5V output, 25-75% load step, 2.5A/usec ramp rate, VIN = 24V, TA = 25°C
|+/-0.5% at 5V output, 10A load, VIN = 24V, TA = -40°C to 85°C
|On / off
|Remote or programmable on/off logic input
|PC/104 form factor
|3.55 ” x 3.775″ (90mm x 96mm)
|not including screw terminals
|Maximum height 0.435″ (11mm) above PCB top surface
|Bus connection options
|16-bit stackthrough ISA bus
|32-bit PCI bus
|-40°C to +85°C (-40°F to +185°F)
|5% to 95% non-condensing
|6.3oz (179g) with heat sink
|8.1oz (230g) with heat spreader