Diamond Systems JB-JAX-ONX16 NVIDIA Jetson Orin NX 16GB Fanless DIN Rail PC with Dual GbE, CAN and 1TB NVMe SSD

Industrial vision cells and control cabinets often need Jetson inference beside PLCs and drives, in an enclosure that clips onto the same DIN rail. The JB-JAX-ONX16 is the Orin NX 16GB model in the Diamond Systems JETBOX-JACKSON series, a fanless DIN rail PC built on Diamond’s Jackson carrier board in a steel body with an aluminum heat sink cover.

NVIDIA rates the Jetson Orin NX 16GB module at up to 100 TOPS, and Diamond’s Linux OS based on NVIDIA JetPack supports Super Mode, which the manual quotes at 157 TOPS for this module. That suits multi-camera inspection, people counting and robot guidance at the edge. The JB-JAX-ONX16 ships as Diamond’s JB-JAX-ONX16-1T-01, with a 1TB NVMe SSD holding the operating system, and a 2TB SSD by special order.

Front-panel I/O covers two Gigabit Ethernet ports on RJ-45, two USB 3.2 ports with USB 2.0 fallback on type A connectors and one HDMI output. One RS-232 port sits on a DB9 connector and one jumper-configurable RS-232/485 port on RJ-12, with one CAN port on DB9 and 16 GPIO on a DB25 connector, configurable for 3.3 or 5 V. Internally there is a PCIe/USB minicard socket with a nano SIM socket and an M.2 E-key 2230 socket, and Diamond can fit Wi-Fi, Bluetooth or modem modules at the factory. Front-panel reset and recovery buttons are recessed.

The JB-JAX-ONX16 takes 8-20 V DC through a pluggable screw terminal block and runs fanless from -25 to +80 °C, with Diamond estimating 70 °C with Super Mode at full performance. It mounts on a DIN rail or a shelf and is RoHS compliant. The JB-JAX-ONX8 offers the Orin NX 8GB with the same I/O, and the JB-JAX-ONA8 the Orin Nano 8GB. We supply each unit configured, with the JetPack image loaded and the system tested before it ships.