Forecr MILBOX-AGX-SDI-64I NVIDIA Jetson AGX Orin Industrial Tactical Computer with 4x SDI Capture

Arctic patrols, high-altitude posts and winter vehicle operations push electronics below the -25°C floor of standard Jetson AGX Orin builds. The MILBOX-AGX-SDI-64I is the industrial tactical computer in the Forecr MILBOX-AGX-SDI series, built on the NVIDIA Jetson AGX Orin Industrial module so that SDI video analytics keep running down to -40°C.

The Jetson AGX Orin Industrial carries 64GB of 256-bit LPDDR5x memory and runs deep neural networks, real-time video analytics and sensor fusion on the computer itself. Four SDI inputs on BNC connectors bring camera video straight into the module, so detection, tracking and recording run without a separate capture box. Forecr also builds the same four rear coax positions with 4x GMSL2 camera inputs, 4x analog video or 2x HD-SDI with 2x analog in place of the four SDI inputs. The MILBOX-AGX-SDI-64I supports Ubuntu 20.04 or 22.04 with JetPack 5.x or 6.x.

For networking and field I/O, the MILBOX-AGX-SDI-64I provides four Gigabit Ethernet ports, one USB 3.1 port, two USB 2.0 ports, a USB 2.0 serial console, two CAN bus ports, four RS-232 ports and four RS-422 ports, plus one HDMI output for a local display. Storage uses 64GB of eMMC 5.1 flash and an SD card slot, with the single M.2 Key-M 2280 socket listed as occupied on the datasheet. Power comes from a 12-36 VDC input with a 28 VDC nominal rating, which suits the supplies found on military vehicles and aircraft.

Forecr designed the enclosure to meet MIL-STD-1275/704, MIL-STD-810, MIL-STD-461 and IP67, and the datasheet gives an ambient range of -40°C to +70°C with this Industrial module. At 30 x 24 x 10 cm and 5.3 kg, this tactical computer suits vehicle, vessel and aircraft equipment bays. Where cold-start margin is less critical, the MILBOX-AGX-SDI-64S pairs the same SDI front end with the standard 64GB module.