Premio CT-DR101-V1605B 3.5″ SBC with AMD Ryzen Embedded V1605B, Triple Display and -40 to 75 °C

Boards in roadside cabinets, outdoor enclosures and unheated plant rooms have to start in freezing conditions and keep running through summer heat. The CT-DR101-V1605B is the four-core V1605B build in the Premio CT-DR101 series: a 3.5 inch SBC rated from -40 to 75 °C, with an onboard AMD Ryzen Embedded processor, ECC memory support and three independent display outputs.

The AMD Ryzen Embedded V1605B has four cores and eight threads at up to 3.6 GHz with 4 MB cache and AMD Radeon Vega 8 graphics, which gives headroom for graphics-rich HMI and multi-screen software. Two DDR4-2400 SO-DIMM sockets take up to 32 GB, with ECC and non-ECC modules supported. The display set covers DisplayPort 1.4 (DP++) at 3840 x 2160 and 60 Hz, HDMI 2.0b and a 24-bit dual-channel LVDS header at up to 1920 x 1200, with three independent displays supported.

Two Gigabit Ethernet ports on Intel i210 controllers support Wake-on-LAN and PXE boot. The rear panel carries two USB 3.2 Gen2 (10 Gbps) and two USB 2.0 ports, with two RS-232/422/485 ports, two 4-bit DIO (4 in, 4 out) and Realtek ALC888S audio on internal headers. An M.2 B key socket in 3042 with an attached SIM socket takes a 4G/5G module or a SATA SSD, beside a SATA port, and a full-size Mini PCIe slot (PCIe x1, USB 2.0) and a 50-pin high-speed PCIe x4 connector handle expansion. The CT-DR101-R1606G is the same board with the dual-core R1606G and Radeon Vega 3.

Power is 12 V DC in AT or ATX mode on a 4-pin internal connector, with over-voltage, over-current and reverse-polarity protection. TPM 2.0 is on board, and a software watchdog resets the system after 1 to 255 seconds. The board operates from -40 to 75 °C, stores from -40 to 85 °C and handles 10 to 90% humidity, non-condensing. It measures 146 x 102 mm and ships with a heat sink. Windows 10 and Linux kernel 5.x, including Fedora 30 or above and Ubuntu 19.04 or above, are supported.