Winmate R10L100-65T2 10.4″ IP65 Stainless Steel Monitor with M12 Connectors and Resistive Touch

In food processing and other wet, harsh areas, a monitor gets hosed down along with the line, so the whole housing and every connector have to be sealed. The R10L100-65T2 is Winmate’s 10.4 inch IP65 stainless steel monitor for those areas, with M12 connectors and an XGA panel, and it connects to a separate PC kept in a dry cabinet.

The 10.4″ panel shows 1024 x 768 (XGA) at 350 nits, with 1000:1 contrast, 16.2 million colors and viewing angles of 176 degrees horizontal and 176 degrees vertical. Resistive touch is an option, as is protection glass without touch, and touch control runs over an optional M12 USB or M12 serial connector. Optical bonding is optional for better readability. A power button, up and down adjust buttons, ESC and OK keys handle the menu, with LEDs for power and status.

The R10L100-65T2 connects to a separate PC or controller over VGA on an M12 connector as standard, with waterproof DVI or HDMI inputs as options, and an external VGA cable with a waterproof connector and waterproof caps for unused ports are supplied. Within the Winmate range the R10L100-SPT269 is a 10.4″ IP69K stainless steel PCAP monitor for high-pressure washdown, and the R10L100-RMA1WT is the rear mount model with a -20 to 60 °C range for dry enclosures.

Power is 12 V DC through an M12 waterproof connector, and an AC adapter with a waterproof connector and a power cord are supplied. Winmate rates the whole enclosure IP65 against dust and water jets, in SUS 316 / AISI 316 stainless steel with fully sealed connectors and a fanless design. It runs from 0 to 45 °C at 10 to 90% humidity, non-condensing, and stores from -20 °C to 60 °C. It mounts on VESA, with a yoke stand as an option. It carries CE and FCC marks. We supply the R10L100-65T2 configured and tested before dispatch.