Winmate W22L100-OFA3 21.5″ Open Frame Monitor with FHD 3000:1 Display and Optional Touch

Kiosk makers and machine builders usually design their own front bezel and want a display that drops in behind it, rather than a finished monitor with its own case. The W22L100-OFA3 is Winmate’s 21.5 inch open frame monitor for that job, with a 1920 x 1080 panel in a fanless metal frame that rear mounts or sits on VESA holes. It is a good fit for self-service terminals, vending and machine fronts.

The panel runs at 250 nits with a 3000:1 contrast ratio, 16.7 million colors and 178° viewing angles, which suits indoor kiosks, vending and machine fronts. Touch is not fitted as standard: resistive touch, SAW touch or a protection glass without touch are offered as options, with a USB port for the touch link. That lets the same frame serve a view-only information screen or an operator touch point.

Video comes in over VGA as standard, with HDMI and DVI inputs available as options, plus an optional 3.5 mm audio line-in and a pair of optional speakers. A five-key OSD panel sits on the rear. For daylight or shop window use, the W22L100-OFA3HB is the 1000 nit version of this frame, and the W22L100-POA3 fits projected capacitive multi-touch as standard.

Power is 12 V DC, with a 100 to 240 V AC adapter supplied, and an optional remote controller is listed for setup. The unit measures 504 x 318 x 60 mm and mounts from the rear or on 75 x 75 and 100 x 100 mm VESA holes. It operates from 0 °C to 50 °C at 10 to 90% humidity and carries CE and FCC marks.