Skip to main content

Diamond Systems DS-MPE-CAN2L

Rugged Dual CAN 2.0 Port PCIe MiniCard Module with Latching Connectors

mPCIe

Things Embedded are an official Diamond Systems USA distributor and can supply the DS-MPE-CAN2L.

Categories:

CAN Bus I/O

Manufacturer:

Diamond Systems

Overview

The DS-MPE-CAN2L is a rugged, low cost dual port CAN 2.0 PCIe MiniCard module that is ideal for CAN expansion in embedded and OEM applications.

The module implements a CAN protocol bus controller that performs serial communications according to the CAN 2.0A and CAN 2.0B specifications. The protocol uses a multi-master bus configuration for the transfer of frames between nodes of the network and manages error handling with no burden on the host processor. Error analysis features enabling diagnostics, system maintenance, and system optimization. A listen-only mode enables CAN bus traffic analysis and automatic bit-rate detection.

Extended temperature capability (-40°C to +85°C) enables the board to operate in environments with extreme temperature swings, such as vehicles or outdoor installations. In addition, the board may be custom-configured with 0-ohm resistors in place of jumper blocks for increased ruggedness in high-vibration environments.

The DS-MPE-CAN2L product comes with the PCIe MiniCard hardware assembly, a cable kit with two CAN cables, and a hardware kit containing jumpers and mounting screws.

 

Specification

Overview
Brand & Model Diamond Systems DS-MPE-CAN2L
Rugged Dual CAN 2.0 Port PCIe MiniCard Module with Latching Connectors
Features Compact
Industrial
Rugged
Number of ports 2 CAN 2.0B
Data rate 1Mbps
Receive buffers 31
Transmit buffers 1 high priority
16 standard priority
Acceptance filters 16 programmable, 29-bit
Identifiers Supports 11-bit and 29-bit
Modes Dual-independent
Dual-redundant
Isolation 500V port-to-port and input-to-output
Input power +3.3VDC +/-5%
Power consumption 0.462W @ 3.3V
Software drivers Windows 7, XP
Linux 2.6.16, 2.6.27, 2.6.31, 2.6.32
Form Factor PCIe MiniCard full size
Dimensions 50.95 x 30mm (2 x 1.18″)
Operating temperature -40ºC to +85ºC
Operating humidity 5% to 95% noncondensing
MTBF 1,583,210 hours at 20ºC
Weight 8.5g (0.3oz)
RoHS Compliant

Need Help Choosing CAN Bus I/O?

Tell us about your application and a member of the team will get right back to you.