Things Embedded are an official Diamond Systems USA distributor and can supply the EPS-12G2 fully configured.
The Epsilon-12G series is a family of managed Layer 2+ Ethernet switches offering twelve 10/100/1000Mbps copper twisted pair ports and up to two 1G/2.5G small form factor pluggable (SFP) sockets in a rugged single board solution. Epsilon-12G2 is designed for rugged applications including industrial, on-vehicle and military.
Epsilon-12Gx is a standalone switch that does not require any host computer interface. All switch functions are managed by a 480MHz MIPS processor embedded directly into the switch running embedded management software. The processor is accessed via an in-band web interface over one of the Ethernet ports or via an out-of-band command-line interface over an RS-232 serial port. The integrated web interface provides an intuitive GUI for use in configuring and managing all switch functionality. On-board memory holds dual application images, boot code, MAC addresses, and other parameters, and can also be used for program execution.
Epsilon-12Gx can be fitted with a single or dual SFP socket for interfacing to 1G/2.5G fiber Ethernet networks or for use with copper SFPs. A no-SFP configuration is also available.
Input power is provided through the built-in, wide-range +5 to +40VDC power supply, enabling operation using industrial power sources.
Epsilon-12G2 was designed for use in vehicle and harsh environment applications. All I/O connectors are latching, providing enhanced reliability over the RJ-45 connectors used in commercial Ethernet switches. A 50% thicker PCB provides better protection against vibration in vehicle environments. The wide range 5-40V input power supply is compatible with all common vehicle and industrial power sources. The -40ºC to +85ºC operating range makes Epsilon-12G2 suitable for use in outdoor and vehicle applications.
Epsilon-12G2 comes loaded with all required firmware, enabling its immediate operation without any development effort. The included web interface provides an intuitive GUI for use in configuring and managing switch functionality.
|Brand & Model
|Diamond Systems EPS-12G0
|Wide Temperature COM Express Layer 2+ 12 Port Managed Ethernet Switch
|Managed Ethernet Switch
|14-port, Layer 2+ switch
|Built-in MIPS 416MHz 24KEC microcontroller for configuration and management
|Number of Ports
|12 10/100/1000Mbps Ethernet ports with non-blocking wire-speed performance
|1 1G SFP socket; 1 2.5G SFP socket
|4Mb packet memory
|Shared memory buffer with per-port & CoS memory management
|Hierarchical MEF compliant policing & scheduling
|MEF E-Lane, E-Line, and E-Tree services
|Jumbo frame support at all speeds
|IEEE 802.1Q VLAN switch with 8K MACs and 4K VLANs
|Push/pop up to two VLAN tags
|Independent & shared VLAN learning (IVL, SVL)
|IPv4 and IPv6 multicast group support
|Dual leaky bucket policers with remarking and statistics
|8 priorities and 8 CoS queues per port with strict or deficit-weighted round robin scheduling
|Shaping/policing per queue and per port
|Policing with storm control and MC/BC protection
|Advanced security and prioritization available though multistage TCAM engine
|Rapid Spanning Tree Protocol (IEEE 802.1W) and MSTP
|Support for both WebStax and CEServices MIBs
|ActiPHY and PerfectReach power management
|VeriPHY cable diagnostics
|1 RS-232 port for host interface
|24 status LEDs, two per port
|2 general purpose
|Standalone network switch, or in combination with a host computer
|+5 to +40V DC/DC power supply
|9.2W maximum with all ports active
|COM Express (95 x 125mm)
|-40°C to +85°C (-40°F to +185°F)
|4.9oz (138.9g) with heatsink