Things Embedded are an official Diamond Systems USA distributor and can supply the EPS-8130 fully configured.
Epsilon-8130 is a managed Layer 2+ Ethernet switch module offering eight 10/100/1000Mbps copper twisted pair ports in the compact PC/104 form factor. It is designed for rugged applications including industrial, on-vehicle and military. EPS-8130 is a direct replacement for the previous EPS-8100 and is fully backwards compatible with the previous product in all key respects.
Epsilon-8130 is a standalone switch that does not require any host computer interface. All switch functions are managed by a 416MHz MIPS processor embedded directly into the switch. The processor is accessed via an in-band web interface over one of the Ethernet ports or via an out-of-band command-line interface over an RS-232 serial port. The integrated web interface provides an intuitive GUI for use in configuring and managing all switch functionality. On-board memory holds dual application images, boot code, MAC addresses, and other parameters, and can also be used for program execution.
Epsilon-8130’s advanced Ethernet switch chip includes two innovative features that enable automatic power savings. The switch can detect unused Ethernet ports on network devices and power them down or place them in stand-by mode. Additionally, the switch actively adjusts the power level needed based on cable length, saving energy on links shorter than the 100m maximum specified length.
Epsilon-8130 was designed for use in vehicle and harsh environment applications. All I/O connectors are latching, providing enhanced reliability over the RJ-45 connectors used in commercial Ethernet switches. The wide range 5-36V input power supply is compatible with all common vehicle and industrial power sources. The -40ºC to +85ºC operating range makes Epsilon-8130 suitable for use in outdoor and vehicle applications.
Epsilon-8130 comes loaded with all required firmware, enabling its immediate operation without any development effort. The included web interface provides an intuitive GUI for use in configuring and managing switch functionality.
|Brand & Model
|Diamond Systems EPS-8130-XT
|PC/104 Managed Rugged 8 Port Gigabit Ethernet Switch with Heat Spreader
|Managed Ethernet Switch
|Managed Layer 2+ switch
|Built-in MIPS 416MHz 24KEC microcontroller for configuration and management
|Number of Ports
|8 10/100/1000Mbps Ethernet ports with non-blocking wire-speed performance
|4Mb packet memory
|Shared memory buffer with per-port & CoS memory management
|Hierarchical MEF compliant policing & scheduling
|MEF E-Lane, E-Line, and E-Tree services
|Jumbo frame support at all speeds
|IEEE 802.1Q VLAN switch with 8K MACs and 4K VLANs
|Push/pop up to two VLAN tags
|Independent & shared VLAN learning (IVL, SVL)
|IPv4 and IPv6 multicast group support
|Dual leaky bucket policers with remarking and statistics
|8 priorities and 8 CoS queues per port with strict or deficit-weighted round robin scheduling
|Shaping/policing per queue and per port
|Policing with storm control and MC/BC protection
|Advanced security and prioritization available though multistage TCAM engine
|Rapid Spanning Tree Protocol (IEEE 802.1W) and MSTP
|Support for both WebStax and CEServices MIBs
|ActiPHY and PerfectReach power management
|VeriPHY cable diagnostics
|1 RS-232 port for host interface
|18 status LEDs, two per port
|2 general purpose
|Standalone network switch, or in combination with a host computer
|+5 to +36V DC/DC power supply
|5.4W typical at +5VDC
|Form Factor / Dimensions
|PC/104 3.55″ x 3.775″ (90mm x 96mm)
|-40°C to +85°C (-40°F to +185°F)
|3.5oz (99g) with heatsink
|624,170 hours at 20°C