EverFocus eNVP-JOX-IV-F4000 NVIDIA Jetson Orin NX Edge AI Box PC with PoE-PD Input and 1x PoE LAN

A single camera on a pole or a sensor head in a cabinet often has only one network cable running to it. The eNVP-JOX-IV-F4000 is built for that case: an edge AI box PC from the EverFocus eNVP-JOX-IV series that can take its power over PoE-PD, with an NVIDIA Jetson Orin NX 16GB for inference at the edge.

The Orin NX 16GB pairs a 8-core Arm Cortex-A78AE CPU with a 1024-core NVIDIA Ampere architecture GPU and 32 Tensor Cores, and the 16GB of 128-bit LPDDR5 is soldered onboard. EverFocus ships the eNVP-JOX-IV-F4000 with Linux and NVIDIA JetPack 5.1 and above, so detection and analytics models built with the NVIDIA tools can be deployed as they are. Storage is an M.2 M-Key 2280 NVMe slot, and an M.2 E-Key 2230 slot plus an M.2 B-Key 3042/3052 slot take Wi-Fi or the optional 4G LTE (Cat 1) module, with GPS also offered.

The eNVP-JOX-IV-F4000 keeps networking to two Gigabit RJ45 ports: one accepts PoE-PD power at up to 60 W and the other delivers 15 W PoE to a camera or sensor. Alongside sit two RS-485 ports on DB-9, two CAN bus ports on a terminal block, eight alarm I/O, four USB 3.1 Type-A ports and an HDMI 2.0 output, plus SIM and micro SD slots. Power arrives on a 9 to 48 V DC terminal block with ignition management in 12, 24 and 48 V modes, so the edge AI box PC can start and shut down with a vehicle or a cabinet supply.

The eNVP-JOX-IV-F4000 runs from -20 to 60 °C at 10 to 95% humidity, non-condensing, with a maximum draw of 45 W. The 192 x 154.8 x 70.4 mm enclosure mounts on DIN rail, a wall or VESA, and NEMA TS2 is available as an option for traffic control cabinets. Where four more cameras need power, the eNVP-JOX-IV-F4004 adds four PoE Gigabit ports with the same Orin NX 16GB module.