Neousys Nuvo-9531 Intel 14th/13th/12th Gen Core Compact Fanless Industrial PC with 4x 2.5GbE and Hot-Swap Tray

Mobile robots and robot arm cells need vision and motion software close to the machine, but there is rarely space for a tall industrial computer. The NUVO-9531 is the standard build of the Neousys NUVO-9531 series: a compact fanless industrial PC 63 mm tall that still takes a socketed Intel 14th/13th/12th Gen Core processor, with four 2.5GbE ports for cameras and controllers that have their own power.

Processor choice runs from the Celeron G6900E to the Core i9-14900 on the H610E chipset, so the NUVO-9531 can be sized for a simple HMI or for multi-camera inspection with 24 cores and 32 threads. One DDR4-3200 SODIMM takes up to 32 GB, dTPM 2.0 is on board and integrated Intel UHD Graphics drives VGA and DisplayPort outputs at up to 4096 x 2304.

Four 2.5GbE ports by Intel I226-IT and four USB 3.2 Gen1 ports all use screw-lock retention, which matters on a moving robot. A software-programmable RS-232/422/485 port, further RS-232 ports and 4-channel isolated DI and DO connect sensors, lights and PLCs. Storage pairs an M.2 2280 NVMe socket at PCIe Gen4 x4 with a hot-swappable 2.5-inch tray, and two full-size mini PCIe sockets with SIM slots plus an M.2 E key socket take Wi-Fi, 4G or 5G. If cameras need power from the computer, the NUVO-9531-PoE adds 802.3at PoE+ to all four ports.

Power is 8 to 48 V DC on a 3-pin terminal block with optional ignition control, covering 24 V machine supplies and vehicle batteries. The NUVO-9531 runs fanless from -25 °C to 60 °C with 35 W processors, while Neousys recommends its optional fan kit for 65 W parts above 50 °C. Vibration and shock are tested to MIL-STD-810G, and the 2.4 kg chassis mounts on a wall as standard or on a DIN rail with the optional kit.