Sintrones IBOX-600-ONX8 NVIDIA Jetson Orin NX 8GB Compact Fanless Rugged Embedded PC with CAN Bus

Most vehicle and machine AI projects need to read the bus as well as the cameras. The IBOX-600-ONX8 is the Jetson Orin NX 8GB build of the Sintrones IBOX-600 series, a compact fanless rugged embedded PC with a dedicated CAN FD port, standard RJ-45 networking and a terminal-block power input.

The Jetson Orin NX 8GB module pairs 1024 CUDA cores and 32 Tensor Cores on the NVIDIA Ampere architecture with a 6-core Arm Cortex-A78AE CPU at 2.0 GHz and 8 GB of 128-bit LPDDR5, plus an NVDLA v2 deep learning accelerator and a PVA v2 vision accelerator. JetPack 6.2 Super Mode is supported, and Sintrones measured 30.24 W at a 24 V input with the module in its 20 W mode.

On the IBOX-600-ONX8, the 2.5GbE port and the GbE port use standard RJ-45 sockets, and the 9-60 V DC input arrives on a 3-pin terminal block with a dedicated ignition pin, which keeps cabling simple in cabinets and equipment bays. Two USB 3.2 Gen 2 Type-A ports share 10 Gbps, and three DB-9 ports carry CAN FD, RS-232/422/485 and four digital inputs with four outputs, alongside HDMI with 4K output. Inside, an M.2 Key B slot with a Nano SIM takes an LTE or 5G modem, an M.2 Key E slot takes Wi-Fi or Bluetooth, a full-size mPCIe slot takes a GPS module, and an M.2 2280 NVMe SSD holds the OS. The CAN FD port supports CAN 2.0 devices too, and a DIP switch sets its 120 ohm termination.

The fanless aluminum enclosure measures 150 x 135 x 69 mm and weighs 1.37 kg, with DIN-rail and wall mounting. It runs from -25 °C to 70 °C ambient with 0.6 m/s airflow, is tested to IEC 60068-2-64 and MIL-STD-810G for vibration and shock, and is compliant with EN 50155, EN 45545-2 (R25) and E-Mark. For high-vibration sites, the IBOX-600-M12X-ONX8 carries this module on M12 connectors. The IBOX-600-ONX8 is a rugged embedded PC for CAN-connected inference.