Vecow ACS-1100 Qualcomm Dragonwing IQ9 In-Vehicle AI Computer with 8 TVI Camera Inputs, 4x PoE+ and Extended Temperature

Fleets that already run TVI analog cameras on buses, trucks and service vehicles often want AI on those feeds without replacing every camera. The Vecow ACS-1100 is an in-vehicle AI computer in the ACS-1000 series built for that job, with eight TVI camera inputs on screw-locking M12 connectors alongside four PoE+ ports for newer IP cameras.

Inside, the ACS-1100 runs the Qualcomm Dragonwing IQ-9075 module, with an octa-core Kryo Gen 6 CPU, an Adreno 663 GPU and 36 GB of LPDDR5 on board, and Vecow rates the IQ9 at up to 100 TOPS of AI performance. That headroom can run detection on every camera stream on board rather than over a mobile link. Storage starts with 128 GB of UFS on board, and the system runs Qualcomm Linux on a Yocto-based BSP.

The camera side carries eight TVI analog camera inputs on M12 connectors. Networking is two 2.5GbE ports and four Gigabit PoE+ ports on an Intel I350 controller, so IP cameras can draw power from the computer itself. Three DisplayPort outputs, two USB 3.1 Type A ports, two RS-232/422/485 COM ports, two isolated CAN FD ports and 16-bit isolated DIO cover driver screens, the vehicle bus and on-board signals. Expansion is M.2 NVMe on PCIe x4, two M.2 Key B sockets with two nano SIMs for optional 5G or 4G LTE, an M.2 Key E socket for optional Wi-Fi, two front-access SSD trays and micro SD.

Power is 9 to 50 V DC on a three-pin terminal block, with 16-mode software ignition control so the ACS-1100 starts and shuts down with the vehicle. It runs fanless from -40 °C to 70 °C, with MIL-STD-810G shock and vibration, CE and FCC marks and a design to EN 50155 and EN 50121-3-2 requirements. Out-of-band management is available on the -OOB build, and a TPM is optional. For a different camera mix, the ACS-1200 moves to 16 GMSL inputs, and the ACS-1300 mixes four TVI with eight GMSL inputs.