Vecow EAC-6000-R16 NVIDIA Jetson Orin NX 16GB Fanless Mini Industrial PC with DIN Mount

Edge AI often has to fit where there is little room: inside a kiosk, a medical cart or a crowded control cabinet. The EAC-6000-R16 puts the 16GB Orin NX module into a 55 mm, 1.7 kg body that wall-mounts or clips to a DIN rail. It is the 16GB fanless mini industrial PC in the Vecow EAC-6000 series.

The EAC-6000-R16 runs an NVIDIA Jetson Orin NX 16GB module with an 8-core Arm Cortex-A78AE CPU, a 1024-core NVIDIA Ampere GPU with 32 Tensor cores and two NVDLA engines, with 16 GB LPDDR5 memory. Vecow rates the Orin NX at up to 100 TOPS of AI performance, enough for several detection and tracking models at once. It ships with Linux and the NVIDIA JetPack SDK, and the module encodes HEVC at up to one 4K stream at 60 fps or six 1080p streams at 60 fps for recording or streaming results.

Networking on the EAC-6000-R16 is two GbE LAN ports on RJ45, with optional X-coded M12 connectors for vibration-prone installs. They join one USB 3.1 Gen 2 and two USB 3.1 ports, two COM RS-232/422/485 ports, 7-bit GPIO, a digital display output, micro USB console and recovery ports, a micro SD slot and an M.2 Key M NVMe SSD, while two M.2 Key B sockets, an M.2 Key E socket and dual SIM sockets take 5G, 4G or Wi-Fi modules for remote sites. Vecow also supports Allxon remote monitoring and control for fleets of units.

Power comes in on 9 V to 50 V DC through a terminal block, with 16-mode software ignition control and a remote switch for vehicle and robot installs. The 193 x 132 x 55 mm, 1.7 kg unit wall-mounts or takes an optional DIN-rail kit, and Vecow rates it from -20 °C to 70 °C in 15 W mode and -20 °C to 55 °C in 25 W mode, with MIL-STD-810G operating shock and vibration and EN 50155 and EN 50121-3-2 EMC listings. For a lower-cost node, see the EAC-6000-R08.