Winmate W10MG3S-PCH2LB-PoE 10.1″ PCAP Touch Panel PC with Arm-Based MediaTek Genio 510 and MIL-STD-810H

Meeting rooms, entrances and shared spaces need a small touch panel that runs from one cable and shows its status from across the corridor. The W10MG3S-PCH2LB-PoE is Winmate’s 10.1 inch PoE panel PC for room booking, access control and room information: a 10.1″ 1280 x 800 PCAP touch screen with an all-around RGB LED light bar.

It runs on a MediaTek Genio 510, a six-core Arm processor with two Cortex-A78 and four Cortex-A55 cores at 2.0 GHz, with 4 GB of LPDDR4 memory, 32 GB of onboard storage and a Micro SD slot. Android 13 is the default OS, with Yocto Linux and Linux Ubuntu 22.04 as options. The display gives 350 nits with 800:1 contrast, and an optional HF RFID reader at 13.56 MHz can support badge check-in for room booking or access control.

One Gigabit LAN port carries both data and power, with the panel acting as an IEEE 802.3at powered device at 25 W. Alongside it are two USB 2.0 Type-A ports, a USB 2.0 Type-C OTG port, one RS-232/422/485 port set to RS-232 by default, a speaker and an optional Micro HDMI output, with Wi-Fi and Bluetooth optional. The W10MG3S-GSH2 is the 10.1 inch Genio 510 panel PC sealed to IP65 all round, and the W10MG3S-EHH2 is the 10.1 inch PCAP touch HMI on the same processor.

Where PoE is not available, 12 V DC on a terminal block is standard, with 9 to 36 V DC as an option, and a 100 to 240 V AC adapter comes with it. The fanless W10MG3S-PCH2LB-PoE has a plastic front bezel on a metal back cover, rated IP65 at the front, and runs from 0 to 50 °C at 10 to 90% humidity. Shock and vibration are tested to MIL-STD-810H. Panel and VESA mounting are supported, and it carries CE and FCC marks. We supply it configured, with the OS installed, and tested before dispatch.