IBOX-650P-T1-01-JAO32 Overview
Camera-based driver assistance and fleet monitoring often need four cameras wired straight to the compute, with low latency over long cable runs. The Sintrones IBOX-650P-T1-01-JAO32 is the 32GB camera build of the IBOX-650P-T1 series: an in-vehicle computer that pairs the NVIDIA Jetson AGX Orin 32GB module with four GMSL-2 inputs and automotive Ethernet.
The 32GB module combines 1792 CUDA cores, an 8-core Arm Cortex-A78AE CPU and 32 GB of LPDDR5, enough for detection and tracking across four cameras with moderate model sizes. The VDB-101 board brings the GMSL-2 links out on FAKRA connectors, and Sintrones lists cameras from oToBrite, e-con Systems and StereoLabs, with BSP versions that can vary by camera. The IBOX-650P-T1-01-JAO64 offers the same camera set with the 64GB module.
Alongside the cameras, the IBOX-650P-T1-01-JAO32 has a 100/1000BASE-T1 port on an H-CMTD connector, plus one 10GbE port and two 2.5GbE ports with IEEE 802.3at PoE+ at 30 W on X-coded M12, so IP cameras and LiDAR can join the GMSL-2 set. Two CAN FD ports on M8 and an M12 RS-232/422/485 port connect vehicle controllers. The 64 GB eMMC holds the pre-installed BSP, an M.2 2280 NVMe slot stores video, and M.2 Key B with Nano SIM, M.2 Key E and mPCIe slots take WWAN, Wi-Fi/Bluetooth and GNSS modules.
Power is 9 to 60 V DC on an M12 K-coded connector with smart power management and surge, over-voltage and reverse-polarity protection, plus an optional backup battery. The vehicle computer runs fanless from -25 °C to 70 °C in an IP40 enclosure, is tested to MIL-STD-810H for vibration and shock, and lists E-Mark and EN 50155. The IBOX-650P-T1-01-JAO32 suits road fleets, rolling stock and autonomous mobility development.
IBOX-650P-T1-01-JAO32 Specifications
| Overview | |
|---|---|
| Brand & Model | Sintrones IBOX-650P-T1-01-JAO32 |
| Features | Embedded Fanless GPU Industrial M12 Connectors Rugged |
| Performance | |
| AI Performance | 200 TOPS |
| System-on-Module | NVIDIA Jetson AGX Orin 32GB: 200 TOPS, 1792-core Ampere GPU with 56 Tensor Cores, 8-core Arm Cortex-A78AE 2.2GHz, 32GB 256-bit LPDDR5, 64GB eMMC, 15-40W |
| Graphics | |
| Display Outputs | 1x HDMI |
| I/O | |
| Ethernet | 4x Ethernet Ports |
| 1x 10 GbE LAN [M12] 1x GbE BASE-T1 [H-CMTD] 2x 2.5 GbE LAN [M12] [PoE] | |
| USB | 2x USB Ports |
| 2x USB 3.2 Gen 2 [Type A] | |
| Serial | 1x Serial Ports |
| 1x RS232/422/485 [M12] | |
| CANbus | 2x CANbus Ports |
| 2x CANbus, M8 | |
| MIPI Interface | 4x GMSL Automotive Camera Inputs [FAKRA-Z] |
| Expansion | |
| M.2 | 2x M.2 Expansion Slots |
| 1x M.2 B-Key [USB] [3042/3052] 1x M.2 E-Key [USB] [2230] | |
| mPCIe | 1x mPCIe Slots |
| 1x mPCIe [USB] | |
| SIM Slots | 1x SIM Slots |
| Wireless Connectivity | Optional 4G Modem Optional 5G Modem Optional WiFi/Bluetooth |
| Storage | |
| Storage | 1x M.2 SSD |
| NVMe | NVMe SSD Support |
| Power | |
| Power Input | 9-60V DC Input [M12] |
| Power Support Modes | AT: PWR on Input ATX: Press Button to Power |
| Ignition Sensing | Supports Ignition Control |
| Environmental Conditions | |
| Thermal Dissipation | Fanless Passively Cooled Chassis |
| Operating Temperature | -25°C to 70°C [-13°F to 158°F] |
| Storage Temperature | -40°C to 80°C [-40°F to 176°F] |
| Humidity | 10-90% (Non-condensing) |
| Shock | MIL-STD-810G |
| Vibration | IEC 60068-2-64 MIL-STD-810G |
| Certification | CE E-Mark EN50155 FCC |
| Mechanical Properties | |
| Weight | 5 KG (11 LBS) |
| Dimensions | 300mm x 190mm x 78mm (11.81" x 7.48" x 3.07") |
Official Sintrones USA Distributor
Things Embedded is an official Sintrones USA distributor, and the Sintrones IBOX range includes several Jetson computers built around GMSL-2 cameras. The IBOX-601-G2 series is an in-vehicle Jetson Orin family with GMSL-2 inputs for smaller camera sets. The IBOX-604-G2 series is a Jetson Orin NX and Orin Nano drone computer for airborne payloads, and the IBOX-650P-IP66 series seals the same AGX Orin camera build to IP66 for exterior mounting.
Across categories, the IBOX-650P-T1-01-JAO32 sits with our in-vehicle PCs for camera-led driver assistance and fleet work. The Jetson module lists it among our rugged Jetson computers, and its two CAN FD ports place it with our Jetson CAN bus computers for vehicle network integration.
Consult. Design. Integrate.
Things Embedded is a leading USA supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.
Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.