Skip to main content
Loading...

Diamond Systems SabreNet-12000-100 12 Port Gigabit Managed Rugged Switch With Layer 3 Software, MIL-STD-461 Filter and Low-Profile Case

The SabreNet-12000-100 is the low-profile build in the Diamond Systems SabreNet-12000 series, a sealed 12-port gigabit rugged Ethernet switch with Layer 3 software, a MIL-STD-461 power filter and 7 to 34 V DC input. It suits harsh-environment networks that do not need PTP timing.

  • 12 Gigabit Copper Ports: Twelve 10/100/1000Base-T ports sit on two MIL-DTL-38999 connectors in groups of four and eight, so each cable run stays sealed.
  • Layer 3 Software: Diamond’s embedded IStaX routing and switching software lets the switch route between network segments as well as switch traffic within them.
  • Two Management Paths: A web interface on any Ethernet port and a local RS-232 port on the four-port connector give both in-band and out-of-band access.
  • MIL-STD-461 Power Filter: An integrated MIL-STD-461 filter module sits on the 7 to 34 V DC input, which keeps this build in the shorter case.
  • Sealed Wide-Temperature Case: An enclosure with an IP67 design and a -40 to +85 °C operating range suits installations exposed to dust, water and temperature extremes.
Thermal Dissipation: FanlessFanless
Operating Temperature: Extended TemperatureExtended Temp
Operating Temperature: Wide Temperature [-40 to 85°C]Wide Temp
USA Support Team: +1 407 214 9446 Call
Select section
  • Overview
  • Specifications
  • Downloads

SabreNet-12000-100 Overview

Connecting a dozen sensors, computers and radios in a vehicle bay or an exposed equipment rack calls for a switch that is sealed, filtered and managed, not a commercial box behind a bulkhead. The SabreNet-12000-100 is the low-profile build in the Diamond Systems SabreNet-12000 series: a complete rugged Ethernet switch that Diamond builds around its EPS-12000 board-level switch, with a MIL-STD-461 power filter and no PTP timing.

It carries 12 10/100/1000Base-T copper Ethernet ports, arranged in groups of four and eight on two MIL-DTL-38999 connectors, so every link enters the case through a sealed circular connector rather than an RJ-45 socket. Diamond’s embedded IStaX Layer 3 routing and switching software runs on the switch, and you manage it through a web interface on any of the ports or through a local RS-232 port on the four-port connector. Diamond can also customize the software branding and the connector arrangement.

The Layer 3 software handles routing between subnets alongside everyday switching, which helps where a vehicle or shelter network is split into separate segments for sensors, mission computers and communications. Inside the case, Diamond’s EPS-12000 pairs an EPSM-10GX switch module with a carrier board that holds the magnetics, the RS-232 transceiver and the power circuits. The SabreNet-12000-120 adds IEEE-1588 PTP to the same low-profile build, and the SabreNet-12000-200 swaps the filter for an isolated MIL-grade power supply in a taller case. Our guide on how a military Ethernet switch is built covers the sealing and power choices behind designs like this.

Power enters through an integrated MIL-STD-461 filter module that accepts 7 to 34 V DC, and this is the short enclosure of the two Diamond offers. The case has an IP67 design and the switch operates from -40 to +85 °C. Diamond publishes a shock and vibration test report for the SabreNet-12000, along with a user manual. A lab bench-grade external cable kit lets you run the switch on the bench before its harness is built.

SabreNet-12000-100 Specifications

Overview
Brand & ModelDiamond Systems SabreNet-12000-100
FeaturesEmbedded
Fanless
Managed Ethernet Switch
Rugged
I/O
Serial1x Serial Ports
1x RS232 [MIL-STD]
Networking
Switching LayerLayer 3
Switch TypeManaged
Ethernet Ports12x 10/100/1000 BASE-TX [MIL-STD]
Number of Ethernet Ports12x Ethernet Ports
Networking StandardsIEEE 802.1D Spanning Tree Protocol
IEEE 802.1Q VLAN
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1X Port-Based Network Access Control
IEEE 802.3 10BaseTx Ethernet
IEEE 802.3ab 1000BaseTx Gigabit Ethernet
IEEE 802.3ad Link Aggregation
IEEE 802.3u 100BaseTx Fast Ethernet
Power
Power Input7-34V DC [MIL-STD]
Environmental Conditions
Thermal DissipationFanless Passively Cooled Chassis
Operating Temperature-40°C to 85°C [-40°F to 185°F]
Storage Temperature-40°C to 85°C [-40°F to 185°F]
Ingress ProtectionIP67
IP67 [Dustproof, Protection against immersion in water up to 1 meter for 30 minutes]
ShockMIL-STD-202G
MIL-STD-810G
VibrationMIL-STD-810G
EMCMIL-STD-461G
CertificationMIL-STD-461
Mechanical Properties
Chassis MaterialAluminum
Dimensions163mm x 137mm x 85mm (6.40” x 5.40” x 3.30”)

Official Diamond Systems USA Distributor

Things Embedded is an official Diamond Systems USA distributor, supplying the SabreNet-12000-100 for USA defense and vehicle programs. Within the Diamond range the EPS-12000-CM is the board-level route for teams that want the same switch core inside their own enclosure, and the SabreNet-12000-200 suits vehicles that need an isolated power supply.

The SabreNet-12000-100 sits among our rugged Ethernet switches and our wider range of managed Ethernet switches for harsh sites. Where a sealed 12-port network needs Layer 3 routing on a filtered 7 to 34 V DC supply without precision timing, this is the build to specify.

Consult. Design. Integrate.

Things Embedded is a leading USA supplier of industrial computing and edge AI systems. We combine technical expertise with a collaborative approach to deliver optimal solutions for your application. Whether it’s an off-the-shelf platform or a custom design, we stay at the forefront of the latest technologies to ensure your success at the edge. Our team works closely with you from concept through deployment, providing guidance, engineering support, and integration expertise every step of the way.

Connect with our solutions experts today to review your requirements and find the ideal solution fit for your application.