NVIDIA Jetson TX2i Module NVIDIA Jetson TX2i 8GB Module with ECC Memory and -40 to 85 °C Rating

Rail, defense and outdoor systems qualified on the TX2i cannot usually swap to a commercial-grade module, so last-time-buy and replacement planning centre on this exact part. The Jetson TX2i Module is the industrial version in the NVIDIA Jetson TX2 series, on the same 400-pin connector as the Jetson TX2 Module and the Jetson TX2 4GB, with the Jetson TX2 NX as the SO-DIMM sibling.

The Jetson TX2i pairs a 256-core Pascal GPU at up to 1.12 GHz with two Denver 2 cores at up to 1.95 GHz and four Cortex-A57 cores at up to 1.92 GHz. Memory is 8 GB of 128-bit LPDDR4 at up to 1600 MHz with ECC enabled in software, and storage is 32 GB of eMMC 5.1. NVIDIA rates module power at 10 W in Max-Q and 20 W in Max-P from a 9.0 to 19.6 V input. There is no Wi-Fi on the module.

The 400-pin connector carries up to six 2-lane or three 4-lane MIPI CSI-2 cameras, three USB 3.0 and three USB 2.0 ports, five PCIe lanes, a SATA port, Gigabit Ethernet, two CAN interfaces and two SD/SDIO interfaces.

NVIDIA rates the TX2i from -40 to 85 °C with a 10-year operating lifetime, against five years for the standard TX2. NVIDIA lists the Jetson TX2i as available through July 2027 in its industrial module table, with an end-of-life notice sent at least eight months before the last shipment. The Orin family uses different connectors, so migration means a new carrier board; the Jetson AGX Orin series includes an Industrial version for designs that need an industrial module. Our TX2 end-of-life and migration guide covers the options.