Jetson Orin NX

10.1 inch panel PCs and in-vehicle displays for cabs, kiosks and outdoor stations. The VPC-101RB2S puts an NVIDIA Jetson Orin module behind an IP66, 1,000-nit optically bonded touchscreen, the VPC-101RA1S runs on an NXP i.MX 8QuadXPlus, and the VDM monitors connect to Sintrones vehicle computers.

The core Sintrones line: fanless Jetson computers from Orin Nano and Orin NX in the 600-series to AGX Orin in the 650P-series, built for vehicles and transport with ignition sensing, wide DC input and GMSL or PoE camera inputs. Most models come in three build levels: standard connectors, M12 rugged connectors and IP66 sealed.

Mini-ITX developer boards on Jetson Orin NX for prototyping before you deploy into an IBOX: the same SOM, so software carries straight across to the rugged or sealed production box.

Rugged fanless computers built around NVIDIA Jetson Orin NX, Orin Nano and AGX Orin, with the camera interface chosen for the job: PoE+ on the NRU-150-FT, GMSL2 on the NRU-160-FT, and an AGX Orin AI NVR in the NRU-220S. The NRU-160-AWP adds IP66 sealing, the NRU-51V is a four-camera GMSL2 hub with 10GbE and the NRU-52S powers four 90 W PoE++ cameras.

NVIDIA Jetson Orin NX and Orin Nano Mini-ITX Carrier Boards with PoE++

PCIe cards that bring cameras into a Neousys system: PoE+ frame grabbers from Gigabit to 10GbE, USB 3 and GMSL2 camera inputs, automotive BASE-T1 Ethernet, and Jetson-powered cards that run AI inference beside the host CPU. We fit and test the card inside the computer before it ships, so cameras, drivers and the power budget are proven as one system.

A low-SWaP Jetson Orin NX computer sized for airframe payload bays, with the camera, sensor and flight-controller interfaces a UAV needs for inspection, mapping and onboard inference.

Edge AI hardware built around video input: Jetson Thor and AGX Orin carrier boards and computers, an AI NVR with eight PoE ports, the NEAR T7X on NVIDIA IGX Thor, the AIR6N0-C-MB NX carrier for Orin NX and Orin Nano, compact Pandora systems including Pandora Health builds with HDMI and SDI capture, VPP6N0 computers, and Holoscan sensor bridges that feed live video into NVIDIA Holoscan.

Video over IP for live production, control rooms and pro AV: NDI and Dante AV encoders and decoders, H.26X streaming encoders with RTSP, RTMP, SRT and HLS, four-channel encoders with on-device AI, and SDVoE transmitters and receivers that carry 4K video over 10G copper or fiber with very low latency.

The railway carrier boards from inside the RAIBOX computers, for integrators building their own rolling-stock or trackside enclosure around NVIDIA Jetson AGX Orin, Orin NX or Orin Nano. Field I/O sits on locking Molex Dura-Clik connectors at the board edge, with sealed HDMI and USB ports, and RAIBOARD-ORNX adds isolated serial, CAN and digital I/O.

Fully militarised, IP67-sealed Jetson computers with circular MIL connectors, for airborne, vehicle and maritime systems that need edge AI in a sealed, MIL-STD-designed enclosure.

Bare carrier boards for integrating NVIDIA Jetson into your own enclosure or product, from Orin Nano and Orin NX through AGX Orin to the AGX Thor T4000 and T5000. Wide-temperature industrial designs with the camera, Ethernet and storage interfaces exposed for your build.

Boxed Jetson systems designed to EN 50155 for rolling stock and trackside deployment: onboard analytics, passenger information and condition monitoring on AGX Orin or Orin NX. The RAIBOARD carrier boards inside them are also available for your own enclosure.

The DSBOARD carrier boards in a standard fanless enclosure: a ready-to-mount Jetson computer for machine vision, robotics and video analytics where the environment is industrial rather than military.

Fanless Jetson Orin edge controllers for inference at the machine: the iEP-6020E (Orin NX 16 GB), iEP-6021E (Orin NX 8 GB), iEP-6022E (Orin Nano 8 GB) and iEP-6023E (Orin Nano 4 GB) on JetPack 6.2 with Super Mode, up to 157 TOPS, in basic, PoE, 4PoE and 5G builds; and the earlier iEP-6010E to 6013E, launched on JetPack 5. All take 12-36 V DC and mount on a DIN rail or wall.

Jetson computers from AGX Xavier through AGX Orin, Orin NX and Orin Nano to the AGX Thor T4000 and T5000 in the EAC-7000, with PoE+, GMSL camera and out-of-band management variants for robotics, vision and autonomous machines. The NAC-1000 and RAC-1000 put AGX Orin in IP66 and IP67 sealed enclosures with M12 I/O for outdoor and vehicle sites.

Advantech MIC systems put NVIDIA Jetson modules into finished industrial computers, from the 130 mm MIC-711-OX on Orin NX to the MIC-742-AT on Jetson Thor with 25GbE over QSFP28. Most are fanless, with GMSL camera options, 5G and Wi-Fi expansion and Allxon remote management, and an IP67 in-vehicle model for fleets.

Diamond carrier boards built into fanless industrial enclosures: the JetBox Osbourne on AGX Orin, JetBox Jackson on Orin NX and Orin Nano, JetBox Stevie on AGX Xavier, JetBox Floyd and Floyd-SC on Nano and Xavier NX, and ZiggyBox on TX2, for cabinets, machines and vehicles that need an industrial build rather than a sealed military one. For sealed MIL-STD designs, see SabreCom and Geode.

Carrier boards and development kits for NVIDIA Jetson: the Jackson and rugged Jackson-ER for Orin NX and Orin Nano, the Osbourne and rugged Osbourne-ER for AGX Orin, the Stevie and Elton for AGX Xavier, and the Floyd and Ziggy for the Nano, Xavier NX, TX2 NX and TX2 generations. Each pairs with a JetBox of the same name when you want it built into an enclosure.

NVIDIA Jetson Orin NX Edge AI Box PCs with PoE-PD Input and 9-48V DC

Compact fanless edge AI computers on NVIDIA Jetson Orin: the X6-ORN and X6-ORN-GMSL on Orin Nano and Orin NX with four Gigabit ports, optional PoE and, on the GMSL build, two GMSL2 camera inputs; the X6X-ORN, the same system in an IP67 sealed housing with M12 and M20 connectors; and the X6a-AGX on AGX Orin with 10 GbE, CAN and up to eight GMSL2 cameras.

JCO computers run NVIDIA Jetson Orin NX, Orin Nano or AGX Orin modules in a fanless chassis with GbE, 2.5GbE, 10GbE or PoE+ camera ports. WCO computers seal the electronics for washdown and outdoor sites, from the WCO-6000-THR with NVIDIA Jetson AGX Thor to the IP66 WCO-3000-ORN with M12 connectors and the IP68 and IP69K WCO-3000-EHL.

Fanless embedded computers on Jetson Orin Nano or Orin NX with two GMSL2 camera inputs, built to run ZED cameras and AI models on the machine. Optional Wi-Fi 6 and a fan kit for MAXN SUPER mode.

Compact fanless Jetson computers on Orin Nano and Orin NX for vision and inference at the edge, with the AIE110 developer kits sharing the same modules so a prototype moves straight to the AIE100 or AIE810 deployment box.

NVIDIA Jetson Orin NX Modules with up to 157 TOPS and 260-Pin SO-DIMM